Cisco 300-615 Troubleshooting Cisco Data Center Infrastructure Exam Exam Practice Test Questions

• Question 1

  Refer to the exhibit.An engineer deploys SAN environment with two interconnected Cisco MDS 9000 Series switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?

  • Import or export a zone set between the switches to synchronize the switches.
  • Change the name of one of the zones to match the other zone set.
  • Set the distribute policy of the zone to full.
  • Ensure that the zone members have different names.

  Show Answer Answer: D Next

• Question 2

  One of Cisco Nexus Series interfaces has become errdisabled with the error message ''DCX-No ACK in 100 PDUs''. What is the cause of this error?

  • The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
  • The acknowledgement number in the server response has not incremented for 100 exchanges.
  • Cisco Discovery Protocol is disabled on the switch.
  • LLDP is disabled on the switch.

  Show Answer Answer: A Next

• Question 3

  An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?

  • Remove all of the local storage that is installed
  • Delete and reconfigure the pWWN of the SAN boot target
  • Remove all of the ISO images that are mounted as a virtual CD-ROM
  • Delete and reconfigure the boot LUN

  Show Answer Answer: A Next

• Question 4

  Refer to the exhibit.Refer to the exhibit. A functioning trunk port Ethernet1/48 exists between two identical Cisco Nexus 5000 Series Switches. The interfaces on the switches support the MACsec feature and are configured identically. To enable manual MACsec, an engineer adds the configuration shown in the exhibit to both sides of the trunk. The trunk port stops functioning. Which action should be taken to resolve the issue?

  • Disable and then enable the port
  • Enable the license for the trunk ports to support MACsec
  • Lower the MTU value to less than 9216 bytes
  • Configure the PMK with a length of 2048 bytes

  Show Answer Answer: B Next

• Question 5

  Refer to the exhibit.A web browser displays a ''not secure'' warning message when accessing the web interface of Cisco UCS Manager. Which action resolves the issue?

  • Load third-party certificate to UCS Manager.
  • Use the correct TCP port for HTTPS.
  • Use a supported web browser.
  • Use a supported version of UCS Manager.

  Show Answer Answer: A Next