Dell EMC D-PEXE-IN-A-00 Dell PowerEdge XE9680 and XE8640 Install Exam Exam Practice Test Questions

• Question 1

  A deployment engineer is discussing the benefits of the PowerEdge XE9680 to a data center manager. A customer has many PowerEdge servers. They require the greatest amount of network throughput possible. The manager asks how many PCle risers and network PCI cards the server can support.What should be the response?

  • Two butterfly risers, and each can have two PCle network cards.
  • Four risers, and each can have two PCle network cards.
  • No riser is supported, but it supports up to ten PCle network cards.
  • One riser for each PSB, and it can have one PCle network card.

  Show Answer Answer: B Next

• Question 2

  A deployment engineer is installing eight PowerEdge XE9680 servers. Two servers will be installed in each of four racks. The data center managers must plan for the power needed to supply power to the four racks.What power consumption information can the deployment engineer give the data center manager?

  • Each rack must have at least 6 PDUs for power high availability.
  • Each server has four 2800-Watt, 15.6 Amp PSUs.
  • Each rack must power 12, 2800-Watt, 15.6 Amp PSUs.
  • Each PDU must use a C20-type connection.

  Show Answer Answer: B Next

• Question 3

  A deployment engineer is installing an XE9680 server. The network connectivity has 24 optical cables that route to switches in the data center. The administrator questions the use of a cable management arm (CMA).What are two items to consider when installing a CMA?The CMA can be installed to open on either the left or right side of the server.Do not route optical cables through the CM

  • A CMA can only be installed with a strain relief bar.
  • The XE9680 does not support a CMA.

  Show Answer Answer: A,B Next

• Question 4

  A deployment engineer is installing a PowerEdge XE8640 server. The rack has four PDUs. Looking at the rear of the rack, one power source provides power to the two left PDUs. A different power source provides power to the two right PDUs.What side of the rack should XE8640 PSU 1 and PSU 2 be connected?

  • PSU 2 in the left and PSU 1 in the right
  • PSU 1 and PSU 2 in the left PDUs
  • PSU 1 and PSU 2 in the right PDUs
  • PSU 1 in the left and PSU 2 in the right

  Show Answer Answer: D Next

• Question 5

  A deployment engineer is installing a PowerEdge XE8640 server. The server is on a lift, and they have aligned the server inner rails with the rail assemble that are secured in the rack. The engineercan only push the server into the rack a short distance before it stops. Pushing forcefully causes the rack to slide back.What action should the deployment engineer take?

  • Press the mechanism on the rail to release the rail lock.
  • Lower the lift and move away from the server.
  • Pull the server out of the rack and realign the lift with the rack.
  • Have a person hold the rack while using force to slide in the server.

  Show Answer Answer: A Next